Sysop Blogs

RK0LXA's HF Channel Selector is not collect.

Submitted by Anonymous on Wed, 2015-09-23 04:51

Since April or May of this year, RK0LXA launched the Pactor-IV mode available for Pactor in the list of QRG.
Distance of My Gateway and RK0LXA is 1070km.
Since then, I watched several stations on Pactor mode using Pactor-IV almost everyday.
Since RK0LXA launched the Pactor-IV mode, I tried to call RK0LXA but its limit was not Pactor-IV but Pactor-III only. RK0LXA cannot use Pactor -IV at the moment.

Winlink for Mexico City EQ drill and USA coordination event. XE2/N6KZB

Submitted by XE2BNC on Sun, 2015-09-20 13:03

Winlink stations were set up to demonstrate for local officials the capabilities of Winlink messaging. RMS Express and HTML templates were used between three stations, two in Mexico one in USA. Total message count over 225, for 4 hours. All stations on emergency power and local officials were very interested.
The two CREBC packet gateways are 5 GHZ Ubiquiti LAN connected to XE2BNC HF gateway, they were used with good results.
Thanks to WW6RB, KI6MBO, W3NRG, XE2BY, XE2DDA, XE2DDB, and XE2GF. (Submitted by me, XE2 N6KZB)

Station relocation

Submitted by Anonymous on Sat, 2015-09-19 07:20

Well, with a move to Texas, the station is no longer running in Idaho. I will be setting it up in Del Rio, TX. I am relieving the KPC-3 of its duties and switching over to the TNC-PI setup. I want the KPC for some other things in work and like the low power consumption of the pi/tnc setup. I have LinBPQ running on it now and just need to configure the BBS and chat side of the software. After that, should be good to go!

Pages

Have our news pushed to your browser or RSS reader. Click the orange RSS feed icon.

Subscribe to RSS - blogs
Winlink Linkomatic